How To Fix Leaking Issues In Geekvape Refillable Pods

A wet pocket or sticky fingers can ruin a good day. Most fans of vaping devices face a mess at some point. It is annoying to see good juice go to waste. Small drops can turn into a big problem if the liquid gets inside the battery.

Fixing this is easy if the right steps are taken. Keeping things clean ensures the Geekvape aegis boost works well.

Check the coil seating:

A loose coil is the main reason for most leaks. If the coil is not pushed in all the way, juice will escape through the tiny gaps. Press it down firmly to ensure the seal is tight. Sometimes a bit of lint or dust gets stuck in the base. Wiping the area before you install a new coil helps create a perfect fit every time.

Watch your fill level:

Filling a pod to the very top leaves no room for air pressure. This pressure pushes the liquid out through the bottom or the mouthpiece. Always leave a small bubble of air inside the tank. This space helps maintain a vacuum that keeps the juice where it belongs. It is a simple habit that stops most leaking before it starts.

Inspect the rubber plugs:

The small rubber door used for filling can get worn down. If it is torn or not closed all the way, air enters and breaks the vacuum. This causes the liquid to flow out freely. Ensure the plug sits flush against the pod. If the rubber looks thin or damaged, it might be time to use a fresh pod to keep things dry.

Use the right juice:

Thin liquids move too fast through the cotton inside the coil. If the juice is mostly propylene glycol, it might leak in warm weather. Thicker liquids with more vegetable glycerin stay in place better. Choosing a thicker blend helps the cotton hold the liquid instead of letting it drip through the air holes. This keeps the inside of your device much cleaner.

Keep it upright:

Gravity is always working against your pod. Leaving a device lying flat on a table allows juice to rest against the seals for too long. If you leave it on its side, the liquid can seep out of the air intake. Try to stand the device up whenever it is not in use. This keeps the juice at the bottom and away from the openings.